 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ALUMINUM ELECTROLYTIC CAPACITORS ZP 4.5mmL Chip Type, Bi-Polarized series Chip type with 4.5mm height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). WP Smaller ZP Smaller Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan ZE Performance Characteristics - 40 ~ +85C 6.3 ~ 50V 0.1 ~ 47F 20% at 120Hz, 20C After 2 minutes' application of rated voltage, leakage current is not more than 0.05 CV or 10 (A) , whichever is greater. Rated voltage (V) tan (MAX.) 6.3 0.30 Measurement frequency : 120Hz, Temperature : 20C 10 16 25 35 50 0.24 0.20 0.18 0.16 0.16 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C 6.3 4 8 10 3 8 16 2 4 25 2 4 35 2 3 50 2 3 Endurance Shelf Life Resistance to soldering heat Marking After 2000 hours' application of rated voltage Capacitance change Within 20% of initial value at 85C with the polarity inverted every 250 tan 300% or less of initial specified value hours, capacitors meet the characteristic Initial specified value or less Leakage current requirements listed at right. After storing the capacitors under no load at 85C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250C Capacitance change Within 10% of initial value for 30 seconds. After removing from the hot plate and restored tan Initial specified value or less at room temperature,they meet the characteristic requirements Initial specified value or less Leakage current listed at right. Black print on the case top. Chip Type 0.5 MAX. Type numbering system (Example : 16V 10F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Capacitance Lot No. Voltage Plastic platform 0.3 MAX. UZ P 1 C 1 0 0 MCL 1GB Taping code C0.2 4.5 Voltage mark for 6.3V is 6V . +0.1 -0.2 D A B C E 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 (mm) 6.3 2.4 6.6 6.6 2.2 A0.2 A0.2 Configuration Capacitance tolerance (20%) Rated Capacitance (10F) Rated voltage (16V) Series name X2 10 16V D0.5 B0.2 0.5 ~ 0.8 Type Dimensions V Cap. (F) Code 6.3 0J 10 1A E 16 1C 25 1E 35 1V 4 4 4 4 4 5 5 6.3 50 1H 1.0 2.0 2.8 4.0 8.4 13 17 20 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 5 6.3 6.3 28 37 45 4 6.3 6.3 17 33 41 4 5 6.3 6.3 12 23 37 49 5 5 6.3 12 16 27 4 5 5 6.3 8.4 16 18 29 Case size D (mm) Rated ripple Rated Ripple (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please select WP(p.47), UN(p.77) series if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UZP1A220MCL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |